How To Hang Blinds Without Drilling Holes: 7 Solutions
The most common way to hang anything is to drill holes and use hooks. But most of the time, this can very easily damage walls.
Drilling holes in walls can also be a daunting task, and not everyone likes to do it.
Secondly, if you live in rented apartments, you might not have permission to drill holes and in doing so, this could get you into some trouble.
In such cases, hanging blinds on your windows can be complicated.
Luckily for us, most of these problems have already been tried, tested, and solved by others.
So, if you’re looking for the best and easiest ways to hang blinds without drilling holes and damaging the wall, I’ve got you covered.
Here are easy and innovative solutions that will make hanging blinds an easy, quick, ad simple job.
Table of Contents
Ways To Hang Blinds Without Drilling Holes
Hang Blinds With Adhesive
This is one of the most straightforward options to hang blinds without drilling.
You will need good quality mounting tape such as 3M Command Strips or VELCRO Heavy Duty Mounting Tape.
Here’s a quick overview of how you would go about using adhesive strips to hang the blinds:
- Begin by cleaning the window frame and removing any dust build-up so that you have a clean surface to work with and the adhesive strips will take to the area.
- Measure the window and cut the adhesive strips according to the appropriate measurements.
- Peel off the back of both strips, then stick them onto the window frame at the distance that you need your blinds to hang.
- Hang your blinds on these strips and press down for a minute or so for better adhesion.
You’ll want to make sure the blind is secured firmly to the wall or window frame before letting go.
Use as many strips as needed if you’re worried that it might not last or pair this with an additional method like using hooks for extra support.
Hang Blinds With Tension Rods
Going for a tension rod is the classic no-drill technique to hang blinds. There are plenty of blinds with built-in tension rods available that can handle the weight of the blind.
This method works great with all window treatments and has a secure hold.
Here’s how it works:
- Start by measuring the window frame and cutting your rods to size. It’s essential you choose the right size blind and tension rod for your window.
- Extend the rod from one end of the window to another and gently push it into place until it fits snugly at both ends.
- Once you have installed the tension rod, clip or hang your blinds onto it.
This is an easy installation option if you want something quick and secure.
Hang Blinds With Clips and Screw-in Hooks
Another method you can consider opting for is using clips and screw-in hooks. Now, this does not require drilling but they might leave a tiny hole that you can easily get away with.
You’ll want to begin by attaching these tiny clips on both sides of the window frame. It’s essential that you do this correctly and make sure they’re tight so that they won’t come off.
You’ll then want to use the screw-in hooks and hang the blinds.
It’s really as simple as that.
Provided that the clips and hooks can withstand the weight of the blind, this is a quick and easy way to hang a blind without drilling holes.
Invest In No Drill Blinds
No drill blinds are basically as the name suggests – no drilling holes.
This is a fantastic and exciting new creation that is specifically designed for this purpose.
It saves so much time, and effort, and it’s really easy to get it up on the window.
Try Using Magnetic Blinds
Magnetic blinds are no-drill blinds that are designed for hanging blinds with no holes. If you have a metal window frame, even better!
It’s often considered a reliable method for renters and homeowners who can avoid the risk of permanent damage to the property.
The way it works is pretty simple and easy. There are magnet brackets on the back of the blinds.
All you have to do is attach the magnetic strips on either side of the window.
The magnets hold the blinds in place and another great feature is that they can be removed at any time.
If you’re worried about the weight of the blind, most of these blinds are designed to support and hold heavyweight blinds depending on the type and brand.
So, stick with a high-quality brand if you want to make sure the blinds actually stay on.
It’s an excellent option if you’re looking for an easy and temporary way to hang blinds without the hassle or use of screws and nails.
Go For Self-Adhesive Blinds
Blinds that already have a strong adhesive attached to the top of the blind are the best option for a stress-free installation.
The ones that are sold are designed to hold and withstand the weight fo the blinds.
This solution is absolutely great for those who want a quick and easy fix as they are available in different sizes, styles, and designs.
It’s another great no-drill blind option to consider.
Hang Blinds With Wire and Hooks
Use wire and hooks to hang lighter blinds such as sheer, wooden light fabric, or light metal blinds.
So, this method does not require drilling a hole but you may need to knock a nail into the wall.
To make proper use of this solution, proceed with the following steps:
- Start by cutting your wire to the exact size you need, depending on how far from the wall you want your blinds to hang.
- Attach one hook to each end of the wire, ensuring they fit in the hole of your blinds and stay in place.
- Mark the wall where you want to attach the wire, and then use a nail to attach it.
- Hang your blinds onto the hooks and adjust them according to your preference.
To be honest, it’s as simple as that. However, I do not recommend this method if you want to hang heavyweight blinds.
This might not be able to support the weight but you can always try any of the other methods on this list.
Additional Suggestions
Here are a few more suggestions or things you should know before hanging your blinds:
Work With A Clean Surface
Having a clean surface is essential if you’re going to use any of the above solutions and methods.
If there is dust, dirt, or an uneven surface, you’ll want to make sure it’s clean and ready.
This is important if you plan to use some sort of adhesive to hang the blinds.
Climate Matters
Since you’re not drilling holes to attach the blinds to the wall, you’ll have to keep in mind the temperature and climate of the area you’re living in.
Adhesives that are exposed to humidity or salty air can affect the support and this can make it wear down faster or not stick at all.
You might have to opt for an alternative solution that does not involve adhesives.
Hire A Professional
If you don’t feel confident to do it yourself, then go ahead and get some help.
A professional will definitely guide and solve the problem for you while also indicating exactly which method for hanging the blinds is the best for your space.
If you have more than one room where you want to hang blinds, this could be a worthwhile investment that saves you the headache of figuring out how to do it yourself.
Questions That May Be On Your Mind
Q. Is it possible to hang blinds with no holes drilled?
Absolutely! As you’ve seen above, there are plenty of ways, methods, and styles to hang blinds without drilling holes which include adhesive tapes, hooks, wires, tension rods, magnetic blinds, or no-drill blinds.
Q. Why is it important not to drill holes in walls?
Drilling holes in the wall can damage or weaken the house’s structure and breach your lease agreement if you rent. Hanging blinds without drilling helps avoid any unnecessary damage to your home.
Q. How long do adhesive strips last?
If you’re going to use adhesive strips to hang blinds, the quality of the strip and the strength will vary depending on the brand. It could last up to 3 years if proper maintenance and cleaning are up to date. The better you take care of the strips, the longer they will last.
Conclusion
Hanging blinds without drilling holes is a great way to avoid unnecessary damage and worry about lease agreements.
Besides that, if you ever change your mind and decide you’d rather have a curtain rod or no blinds at all, you won’t have to worry or deal with a gaping hole in the wall.
There are several ideas and methods to hang blinds without damaging your window frames or walls, from adhesive strips, clips, and tension rods to magnetic blinds.
These tend to be the best method and solution for hanging a blind.
However, different strokes for different folks so pick the method that best suits you but do pay extra attention and care to make sure the blinds hold firmly in place before leaving them alone.
If you have further questions or tips you’d like to share, go ahead and drop them below.
Related Posts:
